• Social Network
    Facebook CAULLinkedin CAULInstagram CAULYoutube CAUL
  • Equipped machines with CAUL
  • Locking moments

  • Warning
  • Axial position of knives
  • CAUL Smart Code
  • Your tools CAUL

    To have high quality work with tools for many years we suggest to follow some simple rules:

    1) We suggest to clean the body and cutter parts of tools periodically to use at most the power of our knives.

    2) On CNC tools type you have to clean shafts and seats of them in machines because even the
    smallest residual of dirty can reduce maximum cutting quality and rotation of machine rotors.
    Our tools are always balanced at least G2.5 that is one of more accurate grade of balancing.

    3) In case of big shock on tools we suggest to send them back to the supplier.
    (damaged parts can be very dangerous)

    4) Knives with a thickness of 2mm suggest to do not sharp more than 0.4mm on front
    to avoid problem on metall.

    If you have questions about your CAUL tools do not hesitate to contact us; safety at first!
    Our contacts.

    Also we suggest you to visit our Download section where you'll find the "Maintenance file" with detailed information on how to use and maintain your tools. Click here!

    Next you can see a video where we show most important procedures to use your new tools.
    We wish you a good work with our tools!!

  • Tools with standard knives

    Locking moment M8 = 9 Nm
    Locking moment M6 = 6 Nm

  • Tools with profiled knives

    Locking moment M10 = 13 Nm
    Locking moment M8 = 11 Nm

  • Standard tools with small grooves - Side

    Locking moment M5 = 7 Nm

  • Standard tools with small grooves - Front

    Locking moment M5 = 3 Nm

  • Radius, straight and groove scribing knives

    Locking moment M5 = 4 Nm

  • Corner radius knives

    Locking moment M6 = 6 Nm

  • Groove knives

    Locking moment M6 = 6 Nm

  • Toothed sector

    Locking moment M6 = 8 Nm

  • Angle knives

    Locking moment M6 = 8 Nm

  • Planer heads

    Locking moment M10 = 20 Nm - Light alloy
    Locking moment M12 = 25 Nm - Light alloy
    Locking moment M10 = 35 Nm - Steel
    Locking moment M12 = 40 Nm - Steel

  • Planer heads with ogives

    Locking moment M10 = 13 Nm
    Locking moment M8 = 11 Nm

  • Planer heads like Centrolock

    Locking moment M8 = 8 Nm
    Locking moment M6 = 6 Nm

  • HSS knurled knives

    Locking moment M10 = 25 Nm
    Locking moment M8 = 20 Nm

  • HSS knives

    Locking moment M10 = 25 Nm
    Locking moment M8 = 20 Nm

  • Rings for thin joints

    Locking moment M4 = 1,5 Nm

  • Front fixing

    Locking moment M10 = 12 Nm
    Locking moment M8 = 9 Nm
    Locking moment M6 = 6 Nm

  • Back fixing

    Locking moment M6 = 12 Nm

  • Hubs with screws

    Locking moment M6 = 10 Nm
    Locking moment M5 = 8 Nm

  • Frontal fixing

    Locking moment M5 = 2,5 Nm
    Locking moment M4 = 2,5 Nm
    Locking moment M3,5 = 2,5 Nm

  • Back fixing

    Locking moment M5 = 3,5 Nm
    Locking moment M4 = 3,5 Nm
    Locking moment M3,5 = 3,5 Nm

  • Blade on trimming hogger

    Locking moment M6 = 5 Nm
    Locking moment M5 = 4 Nm

  • Axial position of knives